pHionics STs Series pH Water Quality Sensor
The pHionics STS Series pH sensor is meticulously engineered to meet your monitoring and control needs. Low maintenance operation, rugged materials & seals, and ground loop elimination all come standard. Just plug two wires into any pH monitoring/control system that accepts 4-20 mA inputs and enjoy years of hassle-free operation.
The STs Series pH water quality sensor makes your job easier by providing years of trustworthy pH and temperature data via noise-resistant 4-20 mA signals.
The sensor has a large, double junction reference electrode for stable measurements over long periods of unmanned operation. In addition, our noise-reduction technology prevents ground loops and other forms of electrical interference for consistently accurate measurements.
A narrow diameter (0.75” or 1.9 cm) and fully sealed, submersible design allows the sensor to go anywhere you need to collect data while the durable, chemicalresistant housing and Kevlar-reinforced cable ensure many years (10+) of operation, even in polluted environments.
Key Features
- Large gel-filled, double-junction electrode providing stable 0-14 pH measurements for long periods of time
- Durable, chemical-resistant housing and cable
- Combination double-junction electrode with large reference reservoir
-
Built-in 0-50°C temperature sensor (2nd channel)
-
Chemical-resistant Delrin®, PVDF, and 316 Stainless Steel housing (Titanium optional)
-
True 2-wire sensor for simple installation
-
Solution ground
-
Narrow diameter (0.75 inches or 1.9 cm)
-
Removable electrode guard
-
Fully submersible up to 70 psi
-
Shielded, Kevlar®-reinforced, water-blocked polyurethane cable
-
4-20 mA signal capable of transmission up to 3 miles (with proper wire gauge)
-
Automatic Temperature Compensation (2% per degree Celsius)
-
Reversible Input Protection and Operation
-
2-second warm-up time
-
Lowest power usage compared to other 4-20 mA pH sensors
-
Isolated to prevent electrical interference and protect connected devices
-
Signal conditioning to remove background noise.
Applications
- Groundwater Monitoring
- Agricultural Run-off
- Mining Pollution
- Industrial Effluent Monitoring
- Wastewater Treatment
- Environmental Remediation
- Aquaculture.
Built-To-Last
With proper care, these sensors are designed for many years of reliable pH monitoring in harsh conditions. The truly unique aspect of the STs Series is that every part, including the cable, is easily replaceable in the event of wear/damage. This considerably extends their lifespan to save your company money. It also keeps waste out of landfills to support sustainable business practices.
Ground Loop Elimination
If you ever have a pH sensor sending erratic measurements and can’t figure out why, then there may be a “ground loop”. A ground loop occurs when the electrical circuit has multiple paths to ground that cause interference. This issue can be very difficult to detect and fix. The best way to avoid ground loops is with input/output electrical isolation, which is built into every pHionics sensor.
Low Maintenance
Very little is required to keep these sensors up. Just perform periodic calibrations and replace the electrode every few years. Electrode replacement is a 60-second procedure that is easily performed in the field without any tools.
Brand | pHionics | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Country of Manufacture | United States | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Explanation | SpecificationspH Sensor
*After proper calibration Temperature Sensor
Cable
pHionics products comply fully with all applicable EU Directives to bear the CE Mark. Delrin® and Kevlar® are registered trademarks of DuPont™. Viton™ is a trademark of Chemours. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ideal For | Professional |
Standard delivery (Royal Mail) - £3.95 to £4.99
Available for purchases under £100. Your order should be with you within 4-5 working days.
Tracked delivery - £5.95 to £6.50
Our tracked delivery is either Royal Mail tracked, Parcelforce or UPS. Your order should be with you within 1-2 working days.
Next Day service - £9.95
Place your order before 2:30pm Monday - Friday and receive your order the next working day (excludes Saturdays, Sundays and Public holidays). Orders placed at the weekend are shipped on the next working day and usually arrive the following day. Goods shipped on a next working day service may be subject to delays by the courier which are outside of our control. Services to outlying areas may differ and take longer and enhanced services may not be available.
International delivery is available for this product. The cost and delivery time depend on country.
Collection
You can collect from our showroom. Please call before visiting to ensure we have your order ready.
-
HOBO RX3000 Remote Monitoring Weather Data Logger (add sensors as required)£1,895.69 £1,579.74